Step by Step Guide to Set Up Your Canon Inkjet Printer

Easy Guidelines for Canon Printer Unboxing and Hardware Setup

  1. The Canon printer comes in a sealed enclosed box. Take out the printer from the box and all its key components i.e cartridges, cables, etc.
  2. Now, remove the polystyrene packaging wraps and all the orange tapes. Also, remove the protective plastic from the display of the printer.
  3. For hardware setup, the first thing is to locate the power socket on the printer. Then, plug in the power cable to the printer’s port and to the wall electrical outlet.
  4. To carry forward, switch on the printer by pressing the power button. Instantly, the printer display light will turn on.
  5. Now, it’s time to insert the ink tanks. For that, remove the cartridges outlet seal and the plastic covers that are covering the cartridge.
  6. Open the top cover of the printer and by doing so the printhead carriage will adjust automatically into its place. Take all the cartridges and put them into their corresponding slots.
  7. Close the printer top cover and you will notice that the printer starts making noises. It clearly indicates that the ink cartridge installation is successfully completed.
  8. Thereafter, you have to put some pages into the paper tray. To do so, open the flap from the back of the printer and gently pull out the input tray.
  9. Move the paper guides and load a few pages into the feeder. Then push the paper tray and properly fit it back into the place. This concludes the hardware configuration of your printer. Now ahead to ij.start.canon for driver downloading.

 

Advertisements