It is not easy to work with any legal asbestos abatement as there is a risk of coming into contact with it. But if you want to encapsulate it as per how to install thin-set and ceramic tile over black mastic, then detection of asbestos is the first step. So, in such cases, have you ever wondered how you will take the samples of any material for asbestos testing? Well, that is not a difficult task if you follow all the safety precautions as per tar on basement floor. So, keep reading to know more about the steps to take a sample of asbestos from tiles or any surface.
Top Three Tips To Take The Samples Of Asbestos Material From Tiles Or Any Surface
Wear Mask And Gloves For Asbestos Sampling
It is not yet confirmed if the floor contains asbestos floor tiles or if the mastic contains asbestos or not. For the same reason, you have decided to take a sample of the material to test for asbestos. Since you have no idea if the material under question is toxic or not, it is best to take a sample of the same. You can wear a mask and gloves specifically meant for this purpose to avoid any complications.
Avoid Improper Breaking As Much As Possible
Never forget that you still are not sure that the material you are dealing with is free from asbestos. Whenever you take any sample, make sure that you do not break or disturb the material as it would lead to the release of the fibers into the air. No matter how many safety measures you take, these fibers once they enter your body can never be removed. So make sure you take the sample with proper tools specified as per the legal asbestos abatement rules.
Always Wet The Material In A Zip Lock Bag
The moment you pick out a small piece from the flooring or any material, it might get disturbed a bit. Even that is enough for the release of fibers due to which you need to somehow limit its release. The only way to do it is by using a mist of water. Just spray some into the zip lock bag in which you are carrying the asbestos material. It is because water helps in limiting the release of fibers from asbestos. Make sure you add a pinch of detergent into it because that will improve the water’s ability to minimize the release of fibers.
So the only way to detect the presence of asbestos in any material is to take out the sample. No matter what you are using there are always chances of the release of fibers, so always take help from experts. They have sufficient knowledge to do everything from asbestos encapsulation to using mastic dissolver. Therefore, be it detection or asbestos removal, the experts will always be of help to you.
