Do you feel there is mastic stuck on the top of your mastic removers? In that case, it is better to get it removed as soon as possible because it spoils the look of your flooring. Along with that, if it contains asbestos then it can be more dangerous. Nowadays best stain blocking primer is no longer a herculean task considering the availability of different types of mastic removers. You might come across chemical mastic dissolvers as well as concrete moisture sealer. Moreover, if it is not toxic then there is no harm in getting it removed as per EPA regulation on asbestos mastic. So the steps to free hardwood floors from mastic are mentioned below in detail.
Three Simple Steps To Free Your Hardwood Floor From Mastic Without Much Hassles
Inspect The Hardwood Flooring And Install The Block
The first step is to start with the inspection of the surface of the flooring for nails, screws, and any other objects. It is to prevent it from becoming a hindrance in the mastic removal process. Moreover, a mastic removal block is to be installed for its proper removal. The main reason for removing screws and other objects is so that it does not harm the mastic removal block.
Dust Collection Tools Are A No No
In the whole process, dust collection systems should be avoided as it leads to the formation of large debris. All these bafflers used to make it difficult for the buffer to set up amidst the dust collection systems. Instead, it is better to sweep off the dust which will not become a hindrance to the block installed. If this is taken care of, then the entire process will get concluded with perfection without any difficulties.
Move The Buffer In The Best Direction
You need to remove the mastic which is possible only when the buffer is moved in the opposite direction. Regardless of where the grain is, you can go against it in the opposite direction. Do not worry about any damage being caused due to the use of the buffer. The block used in it is safe and will not damage the flooring if used properly. So, make sure that the right technique is used to avoid damage to the wooden flooring as the block is made especially for wooden floors.
The above-mentioned are the right steps to remove the mastic from the hardwood flooring. The process is applicable only when the mastic does not contain asbestos. Otherwise, as per legal asbestos abatement, a floor glue remover will only worsen the situation. It is because the asbestos floor tile glue when disturbed can release toxic fibers. So, to avoid contact, encapsulation is best as per EPA regulations for asbestos mastic.
