If you are experiencing missing or skipping lines printing issues on your HP Printer, then the most probable reason for the same is that there is a problem with the print-head of your printer. However, you can conveniently fix this issue on your own by following a simple yet effective procedure that is given below. In case you find your HP printer skipping lines when printing, then first you should try to know the cause behind it. After knowing the possible causes, resolving the printing issue would be quite easy.
This problem usually arises when you install fresh ink cartridges on your device with the protective tape on. So, before you install the fresh ink cartridges in your HP printer, please make sure to remove the protective tape so that the print-head can get in touch with the cartridges. Else, refer to the section given right below.
Steps to fix HP printer skipping lines when printing issue
After making sure that you have removed the protective tape from the installed cartridges, you can go ahead with “print-head cleaning” for which the steps are given below:
- First of all, open a Word document on the device connected to your printer
- Now, click on the “File” option and then select “Print”
- Then, choose your HP Printer model from the given list
- Followed by this, click on the “Preferences” option
- Choose the “Utilities” or “Maintenance” tab, whichever you see
- Locate the “Head Cleaning” option ad then run it
- Now, print a test page to see if the issue is resolved
Conclusion:
If you continue to see HP printer skipping lines when printing issue, then you have to repeat the process mentioned above. If that doesn’t fix the issue, then you may use an HP printer assistant to find out what is causing the missing print issue with your printer.