In this blog post, we’ll walk you through the steps involved in descaling a water heater installation Kingsport TN. You’ll learn what to do if your tankless water heater doesn’t seem to be working as well as it used to, and then identify the cause of your problem. We hope by the end of this post, you’ll have a better understanding of how not only to descale an existing tankless water heater but also how long the process will take with a plumbing repair service.
garbage disposal installation Kingsport TN are more efficient and produce more hot water than traditional tank-based water heaters, but the problem is that they require regular maintenance to keep their flow rates high. The test cycle is set at your local utility company’s standards and can range from 20 to 50 gallons per day, depending on the size of your tankless unit. This is also the time when most people are in a rush.
Take a sample of one of the taps
If the water flow coming out of your plumber Johnson City TN seems slower than usual or is completely shut off, you may be concerned about the safety of the water coming from your home. You can begin by taking a sample from one of the taps in your home to determine if it is safe.
Look for leaks
It would help if you also looked for any leaks around your tankless unit, other than normal condensation that occurs when temperatures are below freezing. If these arent cause for concern, you can move on to cleaning the team. You’ll need a vacuum cleaner with a hose attachment and a container of mild dish soap.
Give the unit a thorough cleaning
Start by giving the unit an excellent, thorough cleaning. Use the steam vac to remove any debris from the bottom and sides of the unit. Be careful not to remove knobs and switches from the heater; you’ll need these later in our cleaning process. Next, using a soft-bristled bristle brush, clean all the heating elements on top of your unit. This includes both top burners as well as those located underneath your unit. Repeat this step if your tankless water heater is located under an extension cord or outlet cover.
Begin this process by covering all electrical components with waterproof tape. This will prevent water from getting into any components as you’re cleaning. A quick note: while there is no need to remove the electrical connections altogether, you should take your time when removing them. Make sure they are completely dry before reattaching them.
Conclusion
You may want to give your tankless water heater installation a light scrub with a disinfectant after the electrical components are taped off. This will remove any mould or mildew accumulated within the unit during use. It’s also not necessary to use any chemicals when cleaning your tankless heater; however, it is wise to use a disinfectant on all exposed metal surfaces on the unit, especially those insides of the burner assembly.
